The Happy Room

Today's project is one of my old favorites. It's a go-to when I'm stumped for a design--it's easy, fast, and is always so colorful and cheery. Today's card features two Michael Strong stamps.

Here's how I made the main image: I sprayed water (in a mister) onto white cardstock. Then, I inked up the Cloisonne Hummingbird stamp in a Calypso Kaleidacolor Ink pad. I stamped onto the very wet cardstock, let the ink run in wild patterns, and then dryed the cardstock with an embossing heat tool. Next, I ironed my cardstock (yes, ironed. Remember yesterday when I said neatness counts? It still does today!) until it was nice and flat again (the water and the heat gun make it curl). Then, I inked up the stamp again in the Calypso Kaleidacolor pad and stamped onto the cardstock in the same place as the first stamping. The results are always different, always spectacular.

Next, I took a stamping sponge and inked around the edges of the cardstock with the same Kaleidacolor pad. It's a cheap-trick way of really making things coordinate. Then, I added some Crystal Effects (sometimes called Dimensional Magic) all the way around the edges, right on top of the inked areas. Then, I poured clear beads onto the Crystal Effects. It makes a very nice, colorful framed edge around any image.

I stamped the small hummingbird image from the Mini Wings set on the background layer, then ran it through a Cuttlebug folder for a "floral" feel. Last, I tied on a coordinating multicolored ribbon.

I hope you've enjoyed today's project and maybe even learned something new. Thanks for stopping by!

Kathie

CLICK ON THE PHOTO FOR A LARGER VIEW

Today's card features the Cloisonne Dragonfly stamp, a long time favorite of image of mine from Strong Stamps. I made the background for this card using a technique I learned on the Technique Junkies group. It's called "Faux Washi Paper" and wow, is it fun and easy.

I made the background first, then decided how I wanted to make the dragonfly. I thought copper embossing powder on eggplant cardstock would be the perfect combination. I wanted to embellish the dragonfly, so I chose to use some irridescent beads which I attached to the dragonfly with Crystal Effects. I carefully cut between the wings with sharp scissors, then gently curled the wings by pulling them between my finger and thumb. I attached the dragonfly's body to the card with two sided foam mounting tape. I also used some larger copper beads to decorate the corner of the cards. They were also attached with Crystal Effects.

TIP: Lastly--and most importantly--I would like to share a very fun embellishment I discovered using a few years ago. Behind the dragonfly, please notice a copper colored material which looks like a type of shred.

What the material is: it's a metal pot scrubber which I purchased at the dollar store--three of them in one package (what a deal!). I cut into the scrubber near the top with a regular pair of scissors, and then gently pulled the material as it began to "unravel" from the scrubber. When I had enough, I simply cut the length. To "tame" this big wad of copper, just roll it into a ball in your hands until it's the size you want. You can attach the material to the base card with just about any kind of clear drying adhesive--I used my favorite fabric glue, Fabri-Tac. Since the material is wadded up into a ball, glue is necessary in only a few places. To ensure attachment, I placed Fabri-Tac in a few places on underside of the dragonfly and then weighted it down on top of the metal material with a few punches until it dried.

I hope my projects have inspired you in new and different ways in using your Michael Strong Stamps and Dies.

Thanks for stopping by today!!

Kathie

CLICK ON THE PHOTOS FOR A LARGER VIEW!!

Today's project features a Tri Shutter card design. For instructions on the cutting, scoring, and folding of a Tri Shutter card, go to my dear friend Bonnie's blog HERE.

Tri Shutter is a great design because it has so many great little pallettes to show off stamped images and embellishments. I've been accused of "over-doing" (such nonsense!) and "over-embellishing" (is there such a thing?) my Tri Shutters. I'll let you be the judge and then you can create as little or as much as you like on your Tri Shutters! =)

I chose a black and white theme because I thought the Cloisonne Butterfly image would look great stamped in black ink on white paper. I had black, white, and silver on my mind, so I designed around my color choices. The small panels on the card display an assortment of some decorative papers I had in my stash, the two outer panels show some regular white cardstock which I Cuttlebugg'd, and the two silver polka dotted pieces are background papers which I attached to the panels, then sewed around them with silver thread in a zig zag pattern on my Janome Sew Mini Sewing Machine. The center panel is a background paper from Scrappin' Deals n Steals which is luxuriously flocked with a black pattern.

The main panel shows off the Michael Strong Cloisonne Butterfly and the two small panels display the smaller butterflies from the Mini Wings stamp set. They were stamped with VersaMark ink and heat embossed with white embossing powder. I die cut the small butterflies with the coordinating butterfly die from the Mini Wings Die Cut set.

The die cuts on the end panels are from Sizzix; the butterflys placed randomly on the panels are a Martha Stewart punch--a few of them were run through a Cuttlebug Swiss dots folder to match up with the polka dotted paper on the inner panels.

The beading on the card:
Large Butterfly Image: I hand glued individual silver beads onto the Butterfly's thorax (middle portion) on the card using Crystal Effects for an adhesive. The beads on the outer edges of the wings are very tiny seed beads. First, I applied a thin line of Crystal Effects in approximately 2" sections on outer edges of the wings. Then, I carefully dipped the wing into a bowl of the seed beads, shook off the excess beads, then let it dry before moving on to the next 2" section.

Small Butterlies: The silver beads were cut from a string of silver beads purchased from JoAnn's Fabric and Crafts stores. They were attached with Crystal Effects.

Hanging Beads with Irridescent Butterflies: These may be difficult to see, so try enlarging the photo if needed. Three strings of beads hang on the right hand side of the card from the small upper panel. I purchased these at WalMart in a close-out bin years ago. The beads--with the transparent irridescent butterflies at the end of each string--are sewn to about 12" of ribbon, and the 12" piece can be cut to the length of your liking. I carefully use fabric glue to affix a thread which runs along the back of the ribbon--it's a continuous length between the beads, holding them all together. If it's not glued before it's cut, one snip of the scissors and the beads begin falling off! I cut three of the individual lengths of beads and butterflies and attached them so they would hang freely and dangle in front of the last panel on the card.

Thank you for staying with me for this very long tutorial; see you tomorrow!

~Kathie

Thanks for stopping by today to see this sculpture card. Doesn't it look complicated?? It isn't!!

I accepted an invitation to be a Guest Designer for Stamper's Quest magazine, a fabulous online publication containing not only my project, but dozens of other projects and papercrafting information.

I prepared this card and a very detailed photo tutorial on how you can make one just like it. It's FREE to view and you can even print out the tutorial right from the Stamper's Quest website HERE.

I hope you'll stop by Stamper's Quest and take a look at the tutorial and all of the photos. And I'd love it if you would be so kind as to leave me a comment for me at the end of the tutorial. (Look for the tutorial under "Guest Designers".)

Thanks for stopping by The Happy Room today!

Kathie